King Polyplast Private Limited

3/4 Inch CPVC Brass Tee is a specialized, hybrid plumbing fitting used in CPVC (Chlorinated Polyvinyl Chloride) piping systems. It is designed to perform two primary functions simultaneously:

1. Branch the Pipeline (Tee): Create a 90 Degree split from the main line.

2. Provide a Metallic Connection: Offer a robust, threaded brass insert on the branch port for attaching fixtures or valves.

1/2 Inch CPVC Tee is a plumbing fitting used in CPVC (Chlorinated Polyvinyl Chloride) piping systems to create a branch line from a main line, forming a "T" junction.

It is a fundamental fitting essential for creating distribution networks for both hot and cold water in residential, commercial, and industrial plumbing.

1.25 Inch CPVC Nail Clamp is a specific type of fitting used in CPVC (Chlorinated Polyvinyl Chloride) plumbing systems. Its sole purpose is to securely fasten CPVC pipe runs to wooden framing (studs, joists, or subfloors) within a building.

• Medium Bodied 
• Fast Setting
• For Pipe Up to 4 inches (100mm)
• CPVC fusion compound
• For Hot and Cold Water application
• Meets the requirements of ASTM D2846 and F493

1/2 Inch 90 Degree CPVC Elbow is a common plumbing fitting made from CPVC (Chlorinated Polyvinyl Chloride). Its essential function is to change the direction of a CPVC pipeline.

20x15mm CPVC Reducing Brass Elbow is a 90-degree pipe fitting used to change the direction of flow while also reducing the pipe size from a larger CPVC pipe to a smaller one. It has two different-sized ends, and the brass portion provides strong, leak-proof threaded connections.

25x20mm CPVC Reducer Tee is a plumbing fitting used in CPVC (Chlorinated Polyvinyl Chloride) piping systems to create a branch line from a main line while simultaneously reducing the pipe diameter at the point of the branch.

100x80mm CPVC Reducer is a plumbing fitting used to connect two CPVC pipes of different diameters. It reduces or increases the flow line size while ensuring a leak-proof, high-temperature-resistant joint.

25x15mm CPVC Brass Reducing Elbow is a 90-degree pipe fitting used to change the direction of flow while also reducing the pipe size from a larger CPVC pipe to a smaller one. It has two different-sized ends, and the brass portion provides strong, leak-proof threaded connections.

A CPVC End Cap is a plumbing fitting used to permanently seal or terminate a CPVC (Chlorinated Polyvinyl Chloride) pipeline. It functions by fitting over the end of a CPVC pipe to stop the flow of water and cap the system.

50x32mm CPVC Reducer is a plumbing fitting used to connect two CPVC pipes of different diameters. It reduces or increases the flow line size while ensuring a leak-proof, high-temperature-resistant joint.

3/4 Inch CPVC Concealed Valve is a wall-mounted flow control valve used in concealed plumbing systems to regulate, start, or stop the flow of water.
It is installed inside the wall with only the chrome-plated operating handle visible outside, giving a clean bathroom look.

These valves are designed specifically for CPVC hot & cold-water pipelines.

A CPVC Tank Nipple is a specialized plumbing fitting used to securely connect a CPVC pipe or fitting to a water tank, boiler, or vessel. It acts as a watertight bulkhead connector that passes through the tank wall.

25mm CPVC Brass Reducer Tee is a specialized, hybrid plumbing fitting designed to perform three functions simultaneously in a hot and cold water distribution system:

1. Branch the Line (Tee): Split the main pipeline into two directions.

2. Reduce Diameter (Reducer): Transition from a larger pipe size to a smaller pipe size on the branch.

3. Transition Material (Brass): Create a robust, metallic threaded connection point for fixtures.

This fitting is used in CPVC (Chlorinated Polyvinyl Chloride) piping systems, which are rated for hot water applications

1 Inch CPVC Male Thread Adapter is a CPVC fitting used to connect a CPVC pipeline to any female-threaded metal fitting. It has a CPVC solvent weld socket on one side and brass male threads on the other side.

A CPVC End Plug is a plumbing fitting used to permanently seal or terminate CPVC (Chlorinated Polyvinyl Chloride) pipe line. It is inserted into a CPVC socket or a female-threaded fitting to stop the flow of water and cap the system.

3/4 Inch CPVC Brass Male Thread Adapter is a CPVC fitting used to connect a CPVC pipeline to any female-threaded metal fitting. It has a CPVC solvent weld socket on one side and brass male threads on the other side.