King Polyplast Private Limited

1/2 Inch UPVC 90 Degree Elbow is one of the most fundamental fittings in a (Unplasticized Polyvinyl Chloride) pipeline system.

Its sole function is to change the direction of the pipeline by a complete 90 degrees (a right angle).

4 Inch UPVC 90 Degree Elbow is one of the most fundamental fittings in a (Unplasticized Polyvinyl Chloride) pipeline system.

Its sole function is to change the direction of the pipeline by a complete 90 degrees (a right angle).

3/4 Inch UPVC Pipe Elbow is a fundamental fitting used in a UPVC (Unplasticized Polyvinyl Chloride) piping system to change the direction of the pipeline. These fittings are essential for navigating corners, obstacles, and transitioning between horizontal and vertical pipe runs.

A UPVC End Cap is a plumbing fitting made from UPVC (Unplasticized Polyvinyl Chloride) used to permanently seal or terminate the end of a UPVC pipe run.

A UPVC Union is a specialized pipe fitting made from Unplasticized Polyvinyl Chloride that connects two pieces of pipe in a straight line. Unlike a standard coupling, a union is designed to be easily separated and reconnected without cutting the pipe, twisting the pipe, or using any tools beyond a wrench.

1 Inch UPVC Brass Elbow is a hybrid plumbing fitting that combines a UPVC (Unplasticized Polyvinyl Chloride) body with a Brass threaded insert.

Its primary function is to change the direction of a pipeline while simultaneously providing a strong, metallic threaded connection point for attaching fixtures or other metal fittings

1/2 Inch UPVC Brass MTA is a pipe fitting used to connect a UPVC pipe to a female-threaded metal/plumbing component.
It has two ends:

• One side: UPVC socket for solvent cement joining

• Other side: Brass male threads for threaded connection

It provides strong, leak-proof, corrosion-resistant transition between plastic pipes and metal fittings.

A UPVC Reducer Bush (also called UPVC Reducing Bush or Reducer Bushing) is a plumbing fitting used to reduce the size of a UPVC pipe or fitting. It is mainly used inside another fitting (socket) to convert a larger size to a smaller size.

It is not used as a direct pipe-to-pipe connector — it fits inside another fitting.

2x1 Inch UPVC Reduced Tee is a specific type of plumbing fitting used in a (Unplasticized Polyvinyl Chloride) pipeline system. Its main function is to create a branch line from a main line, where the diameter of the branch is smaller than the diameter of the main line.

3/4 Inch UPVC Brass Reduced Elbow is a complex, hybrid plumbing fitting designed to perform three functions simultaneously:

• Change Direction: Create a turn in the pipeline, usually 90 degree .
• Reduce Diameter: Transition from a larger pipe size to a smaller pipe size.
• Transition Material: Connect a UPVC pipe to a metallic threaded connection.

A UPVC Long Bend is a specialized pipe fitting made from UPVC (Unplasticized Polyvinyl Chloride) designed to change the direction of a pipeline gradually.

3/4 Inch UPVC Brass FTA is a plumbing fitting used to connect UPVC pipes to any device or fitting that has a male metal threaded connection.

It has a UPVC body for pipe bonding and a brass female threaded insert for strong, leak-proof threading.

3/4 Inch UPVC Brass Elbow is a hybrid plumbing fitting that combines a UPVC (Unplasticized Polyvinyl Chloride) body with a Brass threaded insert.

Its primary function is to change the direction of a pipeline while simultaneously providing a strong, metallic threaded connection point for attaching fixtures or other metal fittings

1.25 Inch UPVC Brass Elbow is a hybrid plumbing fitting that combines a UPVC (Unplasticized Polyvinyl Chloride) body with a Brass threaded insert.

Its primary function is to change the direction of a pipeline while simultaneously providing a strong, metallic threaded connection point for attaching fixtures or other metal fittings

1/2 Inch UPVC Brass Elbow is a hybrid plumbing fitting that combines a UPVC (Unplasticized Polyvinyl Chloride) body with a Brass threaded insert.

Its primary function is to change the direction of a pipeline while simultaneously providing a strong, metallic threaded connection point for attaching fixtures or other metal fittings

15mm UPVC Long Handle Ball Valve is a type of quarter-turn isolation valve made from UPVC (Unplasticized Polyvinyl Chloride). It is primarily used to control (stop or start) the flow of water or other fluids in a UPVC piping system.

The "Long Handle" specification refers to the extended operating lever, which offers increased leverage and visibility compared to standard butterfly or short-handle designs.

237ml Heavy Duty Clear UPVC Adhesive is a specialized chemical product, typically a Solvent Cement, formulated to create permanent, high-strength, and watertight bonds between rigid UPVC (Unplasticized Polyvinyl Chloride) pipes and fittings. The "clear" aspect means the adhesive cures to a transparent or near-invisible finish.